- Weight (without rotator & link)
- 2050 kg / 4,519 lb.
- Max Hydraulic Requirements
- 28 MPa / 4,061 psi
- Cutting Capacity
- 750 mm / 29.5 in.
- Delimbing Diameter Tip-to-Tip
- 510 mm / 20.1 in.
Primarily for tracked carrier applications, the H219X comes standard with a heavy-duty tilt frame for maximum productivity. The H219X can efficiently handle large-size wood in final felling or late thinning applications – including hardwood or softwood – and eucalyptus debarking.
The narrow head design lends itself to improved visibility in thinning applications, while the two-roller geometry design provides excellent handling of variable diameters and challenging tree forms up to 750 mm (29.5 in.) in diameter.
This head is also equipped with a SuperCut 100S saw unit with auto chain tensioning. A new valve cover and rerouted hosing allow for easier access and quicker servicing.
Available configuration options, such as longer upper-delimb arms, top saw and find-end sensors, promote productivity in processing. The new length measuring unit has improved geometry and consistency for more precise measurements – reducing measuring loss and reversals.
|Dimensions||Width arms open (mm/in.)||1900 / 74.8|
|Width arms closed (mm/in.)||1190 / 46.8|
|Height, standard tilt frame, without rotator and link (mm/in.)||1970 / 77.6|
|Weight||Excluding rotator, link and some options (kg/lb.)||2050 / 4,519|
|Maximum opening upper knives (mm/in.)||800 / 31.5|
|Delimbing diameter tip to tip (mm/in.)||510 / 20.1|
|Rear knife maximum opening (mm/in.)||870 / 34.3|
|Feeding||Quantity drive rollers||2|
|Maximum feed roller opening (mm/in.)||760 / 29.9|
|Maximum feed force|
|With 1259/944-cc motors (kN/lbf)||37.3 - 28.1
8,385 - 6,317
|With 1404/1050-cc motors (kN/lbf)||41.6 - 31.2
9,352 - 7,014
|Maximum feed speed (m/s, ft./s)||4.5 – 6.0
15 – 20
|Hydraulic Requirements||Maximum operating pressure (MPa/psi)||28 / 4,061|
|Recommended pump capacity (l/min., gal./min.)||320 – 380
85 – 100
|Cutting||Maximum felling cut diameter (mm/in.)||750 / 29.5|
|Maximum saw bar length (mm/in.)||900 / 35.4|
|Chain type (mm/in.)||10 / .404|
|Carrier Requirements||Wheeled (metric ton)||20-30|
|Tracked (metric ton)||25-35|
|Control and Measuring System||TimberRite H-16|
|Color marking||Stump treatment (through nozzle, saw bar or both)|
|HD tilt frame option||Steel thumbnail feed rollers|
|Steel ribbed feed rollers||Chain and saw bar kits|
|Hydraulic hose kit||Top saw|
|Processing upper delimb arms||Saw chain greasing lubrication|
|Find end sensor|
Not all models available in all countries. Service and support may also vary by region. Please contact a dealer for more information.