- 1970 kg / 4,343 lb.
- Weight (without rotator & link)
- 28 MPa / 4,061 psi
- Max Hydraulic Requirements
- 750 mm / 29.5 in.
- Cutting Capacity
- 510 mm / 20.1 in.
- Delimbing Diameter Tip-to-Tip
With a robust design, the H219 can handle the toughest woods. Durability is built-in with protected hoses, additional guarding and an aggressive measuring wheel.
The H219 can efficiently handle large-size wood in final felling or late thinning applications – including hardwood or softwood – and eucalyptus debarking.
The narrow head design lends itself to improved visibility in thinning applications, while the two-roller geometry design provides excellent handling of variable diameters and challenging tree forms up to 750 mm (29.5 in.) in diameter.
This head is also equipped with a SuperCut 100S saw unit with auto chain tensioning. A new valve cover and rerouted hosing allow for easier access and quicker servicing. Available configuration options, such as a heavy-duty tilt frame, longer upper-delimb arms and a top saw, increase productivity and versatility.
|Dimensions||Width arms open (mm/in.)||1900 / 74.8|
|Width arms closed (mm/in.)||1190 / 46.8|
|Height, standard tilt frame, without rotator and link (mm/in.)||1970 / 77.6|
|Weight||Excluding rotator, link and some options (kg/lb.)||1970 / 4,343|
|Maximum opening upper knives (mm/in.)||800 / 31.5|
|Delimbing diameter tip to tip (mm/in.)||510 / 20.1|
|Rear knife maximum opening (mm/in.)||870 / 34.3|
|Feeding||Quantity drive rollers||2|
|Maximum feed roller opening (mm/in.)||760 / 29.9|
|Maximum feed force|
|With 1259/944-cc motors (kN/lbf)||37.3 - 28.1
8,385 - 6,317
|With 1404/1050-cc motors (kN/lbf)||41.6 - 31.2
9,352 - 7,014
|Maximum feed speed (m/s, ft./s)||4.5 – 6.0
15 – 20
|Hydraulic Requirements||Maximum operating pressure (MPa/psi)||28 / 4,061|
|Recommended pump capacity (l/min., gal./min.)||320 – 380
85 – 100
|Cutting||Maximum felling cut diameter (mm/in.)||750 / 29.5|
|Maximum saw bar length (mm/in.)||900 / 35.4|
|Chain type (mm/in.)||10 / .404|
|Carrier Requirements||Wheeled (metric ton)||20-30|
|Tracked (metric ton)||25-35|
|Control and Measuring System||TimberRite H-16|
|Color marking||Stump treatment (through nozzle, saw bar or both)|
|Steel thumbnail feed rollers||Steel ribbed feed rollers|
|Chain and saw bar kits||Hydraulic hose kit|
|Top saw||Processing upper delimb arms|
|Saw chain greasing lubrication||Find end sensor|
Not all models available in all countries. Service and support may also vary by region. Please contact a dealer for more information.